Items where Subject is "Engineering"

A

Alamrani, Nasser A. and AL-Aoh, Hatem A. and Kyzas, George (2021) Elimination of Congo Red Dye from Industrial Wastewater Using Teucrium polium L. as a Low-Cost Local Adsorbent. Adsorption Science & Technology, 2021. pp. 1-12. ISSN 0263-6174

Aldewachi, Hasan and Al-Zidan, Radhwan N. and Conner, Matthew T. and Salman, Mootaz M. (2021) High-Throughput Screening Platforms in the Discovery of Novel Drugs for Neurodegenerative Diseases. Bioengineering, 8 (2). p. 30. ISSN 2306-5354

Alghamdi, Abdulaziz Ali and Al-Odayni, Abdel-Basit and Abduh, Naaser A. Y. and Alramadhan, Safiah A. and Aljboar, Mashael T. and Saeed, Waseem Sharaf and Krajišnik, Danina (2021) Adsorptive Performance of Polypyrrole-Based KOH-Activated Carbon for the Cationic Dye Crystal Violet: Kinetic and Equilibrium Studies. Adsorption Science & Technology, 2021. pp. 1-11. ISSN 0263-6174

Ali, Athar and Fontanari, Vigilio and Fontana, Marco and Schmölz, Werner (2020) Spinal Deformities and Advancement in Corrective Orthoses. Bioengineering, 8 (1). p. 2. ISSN 2306-5354

Ali, Enass Laith and Rajih, Abdalwahid K (2024) The Effect of Ag and Ge Multi-micro Alloying Elements on Micro-structure and Mechanical Properties of Al-(3.2) Cu-(2) Li-(0.6) Mg Alloys. In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 168-181. ISBN 978-81-974068-0-5

Alizadeh, Roghayyeh and Nishi, Tatsushi and Bagherinejad, Jafar and Bashiri, Mahdi (2021) Multi-Period Maximal Covering Location Problem with Capacitated Facilities and Modules for Natural Disaster Relief Services. Applied Sciences, 11 (1). p. 397. ISSN 2076-3417

Alulema, Victor and Valencia, Esteban and Cando, Edgar and Hidalgo, Victor and Rodriguez, Dario (2021) Propulsion Sizing Correlations for Electrical and Fuel Powered Unmanned Aerial Vehicles. Aerospace, 8 (7). p. 171. ISSN 2226-4310

Armand, Chamga Tchana and Akong, Obounou and Bonoma, Beguide (2019) Numerical Study of Burning of Biomass in Fixed Bed. Energy and Power Engineering, 11 (02). pp. 35-57. ISSN 1949-243X

Ayodeji, Oso, Ifedotun and Philips, Otuaga, Moses and Makanju, Olanitori, Lekan (2022) Effect of Large Openings on Bending Strength of Reinforced Concrete Beam. Journal of Engineering Research and Reports, 23 (8). pp. 1-10. ISSN 2582-2926

B

Bazzolo, Bianca and Sieni, Elisabetta and Zamuner, Annj and Roso, Martina and Russo, Teresa and Gloria, Antonio and Dettin, Monica and Conconi, Maria Teresa (2020) Breast Cancer Cell Cultures on Electrospun Poly(ε-Caprolactone) as a Potential Tool for Preclinical Studies on Anticancer Treatments. Bioengineering, 8 (1). p. 1. ISSN 2306-5354

Bharath, Anand Nageswaran and Reitz, Rolf D. and Rutland, Christopher J. (2021) Impact of Active Control Turbocharging on the Fuel Economy and Emissions of a Light-Duty Reactivity Controlled Compression Ignition Engine: A Simulation Study. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Bian, Liang and Ma, Jian and Zhang, Jie and Li, Ping and de Oliveira Correia, José António Fonseca (2021) Dynamic Compression Behavior and a Damage Constitutive Model of Steel Fibre Reinforced Self-Compacting Concrete. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Bock, Jason R. and Russell, Julie and Hara, Junko and Fortier, Dennis (2021) Optimizing Cognitive Assessment Outcome Measures for Alzheimer's Disease by Matching Wordlist Memory Test Features to Scoring Methodology. Frontiers in Digital Health, 3. ISSN 2673-253X

Buhani, . and Suharso, . and Miftahza, Nurul and Permatasari, Desy and Sumadi, . and Kyzas, George (2021) Improved Adsorption Capacity of Nannochloropsis sp. through Modification with Cetyltrimethylammonium Bromide on the Removal of Methyl Orange in Solution. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

C

Caguay, Marjun E. and Gavino, Romeo B. and Gavino, Helen F. and Sayco, Theody B. (2023) Development and Performance Analysis of a Mini Twin-Shaft Shredder for Efficient Polyethylene Terephthalate (PET) Bottle Recycling. Journal of Engineering Research and Reports, 25 (8). pp. 217-229. ISSN 2582-2926

Cerino, Eric S. and Katz, Mindy J. and Wang, Cuiling and Qin, Jiyue and Gao, Qi and Hyun, Jinshil and Hakun, Jonathan G. and Roque, Nelson A. and Derby, Carol A. and Lipton, Richard B. and Sliwinski, Martin J. (2021) Variability in Cognitive Performance on Mobile Devices Is Sensitive to Mild Cognitive Impairment: Results From the Einstein Aging Study. Frontiers in Digital Health, 3. ISSN 2673-253X

Chinvorarat, Sinchai and Watjatrakul, Boonchai and Nimdum, Pongsak and Sangpet, Teerawat and Vallikul, Pumyos (2021) An Investigation on the Takeoff Performance of a Light Amphibious Airplane. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 127-138. ISBN 978-93-91882-81-5

Chung, Kung-Ming and Huang, Yi-Xuan (2021) Global Visualization of Compressible Swept Convex-Corner Flow Using Pressure-Sensitive Paint. Aerospace, 8 (4). p. 106. ISSN 2226-4310

D

Del Carpio-Huayllas, Tesoro Elena and Ramos, Dorel Soares and Vasquez-Arnez, Ricardo Leon (2019) Commercial Building Containing Generation Sources: A Technical and Economic Assessment and Its Potential to Participate in Demand Response Programs. Energy and Power Engineering, 11 (02). pp. 76-91. ISSN 1949-243X

Dempsey, Adam B. and Zeman, Jared and Wall, Martin (2021) A System to Enable Mixing Controlled Combustion With High Octane Fuels Using a Prechamber and High-Pressure Direct Injector. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Ding, Lei and Chen, Lingrui and Bai, Yalei and Yao, Huimin and Gao, Chuanyu (2023) Research on the Aerodynamic Characteristics of Leading Edge and Bulge of Ram-Air Parafoil Based on CFD. World Journal of Engineering and Technology, 11 (04). pp. 989-999. ISSN 2331-4222

Dioguardi, Mario and Quarta, Cristian and Sovereto, Diego and Troiano, Giuseppe and Melillo, Michele and Di Cosola, Michele and Cazzolla, Angela Pia and Laino, Luigi and Lo Muzio, Lorenzo (2021) Autotransplantation of the Third Molar: A Therapeutic Alternative to the Rehabilitation of a Missing Tooth: A Scoping Review. Bioengineering, 8 (9). p. 120. ISSN 2306-5354

Doan, Mai Quan and Anh, Nguyen Ha and Van Tuan, Hoang and Tu, Nguyen Cong and Lam, Nguyen Huu and Khi, Nguyen Tien and Phan, Vu Ngoc and Thang, Pham Duc and Le, Anh-Tuan and Pham, Ngo Nghia (2021) Improving SERS Sensing Efficiency and Catalytic Reduction Activity in Multifunctional Ternary Ag-TiO2-GO Nanostructures: Roles of Electron Transfer Process on Performance Enhancement. Adsorption Science & Technology, 2021. pp. 1-13. ISSN 0263-6174

Dong, Yanhao (2022) Optimization Design of Tension Machine Frame Based on Solidworks and ANSYS Workbench. Journal of Engineering Research and Reports, 23 (8). pp. 11-17. ISSN 2582-2926

Dutta, Dhiraj and Borah, Jyoti Prasad and Puzari, Amrit and Valencia, Susana (2021) Adsorption of Mn2+ from Aqueous Solution Using Manganese Oxide-Coated Hollow Polymethylmethacrylate Microspheres (MHPM). Adsorption Science & Technology, 2021. pp. 1-10. ISSN 0263-6174

da Silva de Barros, Aline Oliveira and Rebêlo Alencar, Luciana Magalhães and Alexis, Frank and Santos-Oliveira, Ralph (2021) Distinct Methodologies to Produce Capped Mesoporous Silica with Hydroxyapatite and the Influence in Intracellular Signaling as Cytotoxicity on Human Umbilical Vein Endothelial Cells. Bioengineering, 8 (9). p. 125. ISSN 2306-5354

de Sá Magalhães, Salomé and Keshavarz-Moore, Eli (2021) Pichia pastoris (Komagataella phaffii) as a Cost-Effective Tool for Vaccine Production for Low- and Middle-Income Countries (LMICs). Bioengineering, 8 (9). p. 119. ISSN 2306-5354

E

Esposito, Daniele and Savino, Sergio and Andreozzi, Emilio and Cosenza, Chiara and Niola, Vincenzo and Bifulco, Paolo (2021) The “Federica” Hand. Bioengineering, 8 (9). p. 128. ISSN 2306-5354

Ezeugwa, Favour Amarachi (2024) Evaluating the Integration of Edge Computing and Serverless Architectures for Enhancing Scalability and Sustainability in Cloud-based Big Data Management. Journal of Engineering Research and Reports, 26 (7). pp. 347-365. ISSN 2582-2926

F

Frassineti, Lorenzo and Lanatà, Antonio and Olmi, Benedetta and Manfredi, Claudia (2021) Multiscale Entropy Analysis of Heart Rate Variability in Neonatal Patients with and without Seizures. Bioengineering, 8 (9). p. 122. ISSN 2306-5354

G

Gan, Daniel Z. Q. and McGillivray, Lauren and Han, Jin and Christensen, Helen and Torok, Michelle (2021) Effect of Engagement With Digital Interventions on Mental Health Outcomes: A Systematic Review and Meta-Analysis. Frontiers in Digital Health, 3. ISSN 2673-253X

Gao, Chunyan and Rehman, Rabia (2022) Risk Assessment and Analysis of Biomass Energy Engineering Project Management under the Concept of Sustainable Development. Adsorption Science & Technology, 2022. pp. 1-11. ISSN 0263-6174

Gao, Yuhao and Li, Jianzhong and Zhang, Yuxin and Sun, Xu and Yang, Leiyong and Carotenuto, Gianfranco (2021) Mechanical and Microscopic Properties of Graphite/Laterite Nanocomposites. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Garan, Martin and Chmelko, Vladimír and Šulko, Miroslav and Musil, Miloš (2021) Fatigue Failure of a Pressing Machine. Applied Sciences, 11 (1). p. 398. ISSN 2076-3417

Gök, Dilşad Akgümüş (2023) Prototype production and investigation of mechanical properties of leaf springs used in air suspension systems. Engineering Solid Mechanics, 12 (1). pp. 33-40. ISSN 22918744

H

Haas, Quentin and Borisov, Nikolay and Alvarez, David Vicente and Ferdowsi, Sohrab and von Meyenn, Leonhard and Teodoro, Douglas and Amini, Poorya (2021) Vaccine Development in the Time of COVID-19: The Relevance of the Risklick AI to Assist in Risk Assessment and Optimize Performance. Frontiers in Digital Health, 3. ISSN 2673-253X

Han, Jiahong and Li, Xiaoan and Dai, Shujuan and Liu, Guozhen and Bonilla-Petriciolet, Adrián (2021) The Flotation Separation of Magnesite and Limonite Using an Amine Collector. Adsorption Science & Technology, 2021. pp. 1-12. ISSN 0263-6174

Handa, Gaurav and Denton, Bradley and Rengarajan, Sankar and Chadwell, Christopher and Conway, Graham (2021) Utilizing One-Way Valve to Optimize Turbocharger Performance on a Blended EGR Engine. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Hann, Richard and Enache, Adriana and Nielsen, Mikkel Cornelius and Stovner, Bård Nagy and van Beeck, Jeroen and Johansen, Tor Arne and Borup, Kasper Trolle (2021) Experimental Heat Loads for Electrothermal Anti-Icing and De-Icing on UAVs. Aerospace, 8 (3). p. 83. ISSN 2226-4310

Hasan, Hussein Safwat and Hwang, Humor (2024) Economic Feasibility Assessment of Motorized PV Louver System Considering the Near Shading Parameter, Array Incidence Losses and Other Environmental Factors. World Journal of Engineering and Technology, 12 (03). pp. 540-551. ISSN 2331-4222

Hashimov, Kh. Kh. (2023) Study of Automatic Gain Control System in Broadband Radio Receiver. Journal of Engineering Research and Reports, 25 (7). pp. 51-56. ISSN 2582-2926

He, Bihong and Xie, Weixue and Wang, Yuhui and Zhang, Wentao and Ma, Xueyun and Liang, Jianjun and Li, Ping and Fan, Qiaohui and Tran, Nguyen Hai (2021) Distribution Characteristics of Heavy Metals and Pb Isotope in Profile Soils from a Mining and Smelting Area in Northwestern China. Adsorption Science & Technology, 2021. pp. 1-12. ISSN 0263-6174

Hidayat, Endar and Yonemura, Seiichiro and Mitoma, Yoshiharu and Harada, Hiroyuki and Igwegbe, Chinenye Adaobi (2022) Methylene Blue Removal by Chitosan Cross-Linked Zeolite from Aqueous Solution and Other Ion Effects: Isotherm, Kinetic, and Desorption Studies. Adsorption Science & Technology, 2022. pp. 1-10. ISSN 0263-6174

Himaja, Kailasapu and Surendra, T. S. and Kalyani, S. Tara (2022) Coordinated Control Strategy for Multimachine Power System to Enhance Dynamic Stability. B P International. ISBN 978-93-5547-798-9

Huang, Wei and Feng, Zili and Fu, Huanran and Xiang, Wei and Hua, Ming (2021) Evolution of Pore Characteristics for Bentonite Modified by an Ionic Soil Stabilizer during Hydration Processes. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

I

Ignatowicz, Kevin and Morency, François and Beaugendre, Héloïse (2021) Sensitivity Study of Ice Accretion Simulation to Roughness Thermal Correction Model. Aerospace, 8 (3). p. 84. ISSN 2226-4310

Ilmi, Laili Rahmatul and Herawan, Praptana Heri and Purwanti, Endang and Harjo, Kuswanto and Wuryanto, Sis and Sari, Risa Millenia and Afni, Noor Tata (2022) Assessment of Primary Health Centre Information System among Health Staff. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 167-174. ISBN 978-93-5547-492-6

J

Jurczak, Robert and Szmatuła, Filip (2021) Evaluation of the Possibility of Replacing Fly Ash with Glass Powder in Lower-Strength Concrete Mixes. Applied Sciences, 11 (1). p. 396. ISSN 2076-3417

K

Kalaivani, S. and Tharini, C. (2024) Enhancing Data Compression Efficiency in Wireless Sensor Networks: A Study and Modification of Rice Golomb Coding Algorithm. In: Theory and Applications of Engineering Research Vol. 9. B P International, pp. 91-113. ISBN 978-81-971580-7-0

Kamaraj, M. and Kamble, Sudarshan and Sonia, S. V. R. K. N. and Mignardi, Silvano (2021) Facile Synthesis of Silica Composites with Oil Sorption Efficiency from a Vital Agricultural Waste of Corn Stalk Cultivated in Bishoftu, Ethiopia. Adsorption Science & Technology, 2021. pp. 1-5. ISSN 0263-6174

Karthik, P. C. (2022) Detecting Unknown Persons Using Surveillance Camera: A Recent Study. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 161-166. ISBN 978-93-5547-492-6

Kasmawan, I. Gde Antha and Gunawan, Anak Agung Ngurah and Mahardika, Pillar Satya (2022) Design of Automatic Door Lock Based on ATMEGA328P Microcontroller with MLX90614ESF DCI and HC-SR04 Sensors. Journal of Engineering Research and Reports. pp. 48-56. ISSN 2582-2926

Kawano, Seiya and Yoshino, Koichiro and Traum, David and Nakamura, Satoshi (2023) End-to-end dialogue structure parsing on multi-floor dialogue based on multi-task learning. Frontiers in Robotics and AI, 10. ISSN 2296-9144

Kim, Dong-Hyeop and Kim, Young-Cheol and Kim, Sang-Woo (2021) Numerical Evaluation of Structural Safety of Linear Actuator for Flap Control of Aircraft Based on Airworthiness Standard. Aerospace, 8 (4). p. 104. ISSN 2226-4310

Konusarov, Vladimir Anatolevich and Shutov, Evgeniy Alekseevich and Turukina, Tatyana Evgenievna (2019) Grounding Systems for Power Supply Facilities. Energy and Power Engineering, 11 (01). pp. 1-14. ISSN 1949-243X

Krishna, B. Rama and Krishna, M. V. S. Murali and Sri, P. Usha (2023) Analysis of Exhaust Emissions with Low Heat Loss Diesel Engine with Alternate Fuels. In: Techniques and Innovation in Engineering Research Vol. 7. B P International, pp. 44-57. ISBN 978-81-959996-8-2

Kuttin, Kannie Winston and Duodu, Enock A. and Mensah, Augustine and Muhammed, Naziru (2024) Thermo Structural Analysis of Biomass Combustion Steam Generation Heat Exchangers Using Three Dimensional Numerical Modelling. Journal of Engineering Research and Reports, 26 (8). pp. 20-33. ISSN 2582-2926

L

Laidig, Daniel and Jocham, Andreas J. and Guggenberger, Bernhard and Adamer, Klemens and Fischer, Michael and Seel, Thomas (2021) Calibration-Free Gait Assessment by Foot-Worn Inertial Sensors. Frontiers in Digital Health, 3. ISSN 2673-253X

Lazhar, Bouali and Mohammed, Djennah and Redouane, Tahmi and Mahrez, Zahraoui (2022) Electromagnetic Radiation Effects of Radio Frequency Source on the Human Body. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 150-160. ISBN 978-93-5547-492-6

Le, Phuong Thu and Bui, Huyen Thuong and Le, Duy Ngoc and Nguyen, Thi Hue and Pham, Le Anh and Nguyen, Hong Nam and Nguyen, Quoc Son and Nguyen, Thu Phuong and Bich, Ngọc Trinh and Duong, Thi Thuy and Herrmann, Marine and Ouillon, Sylvain and Le, Thi Phuong Quynh and Le, Thanh Son (2021) Preparation and Characterization of Biochar Derived from Agricultural By-Products for Dye Removal. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

Le, Quang Dan and Kang, Hee-Jun (2021) Study on Finite-time Fault-tolerant Control for a Robot Manipulator Based on Synchronous Terminal Sliding Mode Control. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 139-154. ISBN 978-93-91882-81-5

Le Gal, Marion and Renard, Estelle and Simon-Colin, Christelle and Larrat, Benoit and Langlois, Valérie (2021) Amphiphilic and Perfluorinated Poly(3-Hydroxyalkanoate) Nanocapsules for 19F Magnetic Resonance Imaging. Bioengineering, 8 (9). p. 121. ISSN 2306-5354

Le Picault, Brendan and David, Charles-Henri and Alexandre, Pierre-Louis and Lenoble, Cédric and Bizouarn, Philippe and Lepoivre, Thierry and Groleau, Nicolas and Rozec, Bertrand and Desal, Hubert and Roussel, Jean-Christian and Sénage, Thomas (2021) Success of Thrombectomy in Management of Ischemic Stroke in Two Patients with SynCardia Total Artificial Heart in Bridge-to-Transplantation. Bioengineering, 8 (9). p. 126. ISSN 2306-5354

Li, Yanan and Wu, Dan and Sahu, Anoop Kumar and Guo, Xue Tao (2021) Food’s Waste Water Biosolid Assessment against Toxic Element Absorbability of Food’s Cropping Soil Plant by Dominance Theory. Adsorption Science & Technology, 2021. pp. 1-11. ISSN 0263-6174

Liu, Yishi and Hong, Sheng and Zio, Enrico and Liu, Jianwei (2021) Fault Diagnosis and Reconfigurable Control for Commercial Aircraft with Multiple Faults and Actuator Saturation. Aerospace, 8 (4). p. 108. ISSN 2226-4310

Lyashenko, Iakov A. and Li, Qiang and Popov, Valentin L. (2021) Influence of Chemical Heterogeneity and Third Body on Adhesive Strength: Experiment and Simulation. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

M

Ma, Yiming and Lv, Xiaochun and Fang, Naiwen and Xu, Kai and Wang, Xingxing and Yang, Yicheng and An, Hongliang and Zhang, Yan and Xu, Yinan and Kaneko, kenji (2021) Research on Microstructure Evolution of Deposited Metal of Low Nickel High Nitrogen Austenitic Stainless Steel. Advances in Materials Science and Engineering, 2021. pp. 1-8. ISSN 1687-8434

Mallick, Mostafa Kamal and Biser, Sarah and Haridas, Aathira and Umesh, Vaishnavi and Tönsing, Olaf and Yari, Imrana Abdullahi and Ollenschläger, Malte and Heckel, Maria and Ostgathe, Christoph and Kluge, Felix and Eskofier, Bjoern and Steigleder, Tobias (2021) Improving Dyspnoea Symptom Control of Patients in Palliative Care Using a Smart Patch-A Proof of Concept Study. Frontiers in Digital Health, 3. ISSN 2673-253X

Maneechaeye, Pattarachat (2023) Factors Affecting Safety Courtesy Behavior among Thai Flight Crews: Construct Validity and Structural Regression Analysis. Journal of Engineering Research and Reports, 25 (12). pp. 176-183. ISSN 2582-2926

Mashayekhi Mazar, Fariba and Alijanianzadeh, Mahdi and Molaei Rad, Ahmad and Heydari, Payam (2021) Microfluidic Rapid Prototype Enzymatic Biofuel Cell Based on a Nanocomposite. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Mendoza, Mariane A. (2022) Wire Length Formulation Using Wire Density, Volume and Weight for Hand Calculation and Verification of Wire Usage. Journal of Engineering Research and Reports, 23 (12). pp. 82-86. ISSN 2582-2926

Miyake, Shojiro and Wang, Mei and Kim, Jongduk (2024) Determination of Silicon Nanofabrication Processes Using Atomic Force Microscopy (AFM). In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 132-167. ISBN 978-81-974068-0-5

Mthiyane, Pretty and Aycan, Murat and Mitsui, Toshiaki (2024) Strategic Advancements in Rice Cultivation: Combating Heat Stress through Genetic Innovation and Sustainable Practices—A Review. Stresses, 4 (3). pp. 452-480. ISSN 2673-7140

Mubarak, Mahmoud F. and Zayed, Mohamed A. and Nafady, Ayman and Shahawy, Abeer E. L. and Bonilla-Petriciolet, Adrián (2021) Fabrication of Hybrid Materials Based on Waste Polyethylene/Porous Activated Metakaolinite Nanocomposite as an Efficient Membrane for Heavy Metal Desalination Processes. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

N

Nagayama, Kazuaki (2021) A Loss of Nuclear—Cytoskeletal Interactions in Vascular Smooth Muscle Cell Differentiation Induced by a Micro-Grooved Collagen Substrate Enabling the Modeling of an In Vivo Cell Arrangement. Bioengineering, 8 (9). p. 124. ISSN 2306-5354

Naghieh, Saman and Lindberg, Gabriella and Tamaddon, Maryam and Liu, Chaozong (2021) Biofabrication Strategies for Musculoskeletal Disorders: Evolution towards Clinical Applications. Bioengineering, 8 (9). p. 123. ISSN 2306-5354

Naoum, Panagiota and Pavi, Elpida and Athanasakis, Kostas (2021) Economic Evaluation of Digital Health Interventions in Palliative Care: A Systematic Review of the Literature. Frontiers in Digital Health, 3. ISSN 2673-253X

O

Okunleye, Olalekan Jamiu (2024) The Role of Open Data in Driving Sectoral Innovation and Global Economic Development. Journal of Engineering Research and Reports, 26 (7). pp. 222-243. ISSN 2582-2926

Othman, Mohamed I.A. and Eraki, Ebtesam E.M. and Atwa, Sarhan Y. and Ismail, Mohamed F. (2023) Thermoelastic micro-stretch solid immersed in an infinite inviscid fluid and subject to a rotation under two theories. Engineering Solid Mechanics, 11 (3). pp. 299-310. ISSN 22918744

P

Pal, Tarun Kanti (2023) Computational Study of Dynamic Behaviour of Electrohydraulic Servo System. In: Techniques and Innovation in Engineering Research Vol. 7. B P International, pp. 35-43. ISBN 978-81-959996-8-2

Papliński, Janusz P. and Cariow, Aleksandr and Strzelec, Paweł and Makowska, Marta (2024) Digital Signal Processing (DSP)-Oriented Reduced-Complexity Algorithms for Calculating Matrix–Vector Products with Small-Order Toeplitz Matrices. Signals, 5 (3). pp. 417-437. ISSN 2624-6120

Patil, Anita (2021) Study on Seizure Detection from the Features of EEG Signals. In: New Approaches in Engineering Research Vol. 16. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 72-78. ISBN 978-93-5547-070-6

Peng, Dan and Ouyang, Fan and Deng, Min and Nie, Lei and Kong, Sifang and Guo, Xue Tao (2021) A Comprehensive Characterization of Different Fractions of Corn Stover and Their Relationships to Multipollutant Sorption Characteristics. Adsorption Science & Technology, 2021. pp. 1-19. ISSN 0263-6174

Pestaño, Lola Domnina and Bautista, John Paul and Leguiab, Reizl and Puri, Sean Danielle (2021) The Investigation of the Effects of Banana Maturity on the Drying Kinetics of Thinly-Sliced Saba (Musa balbasiana) Using Hot-Air Dryer. In: New Approaches in Engineering Research Vol. 16. B P International, pp. 90-101. ISBN 978-93-5547-070-6

Peter, Ogundola Ilesanmi and Oluwasesan Adeoti, Aderotimi (2023) Evaluation of Total Quality Management Practices on Organizational Performance of Wires and Cables Manufacturing Industries in Ondo State, Nigeria. Journal of Engineering Research and Reports, 25 (8). pp. 9-19. ISSN 2582-2926

Prasad, Varsha and Sandya, S. (2021) Detailed Study on a Robust and Efficient Fault-Resilient Rad Hard ADPLL. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 26-40. ISBN 978-93-90768-21-9

Pretorius, Claudette and Coyle, David (2021) Young People's Use of Digital Tools to Support Their Mental Health During Covid-19 Restrictions. Frontiers in Digital Health, 3. ISSN 2673-253X

Puhl, Devan L. and Funnell, Jessica L. and Nelson, Derek W. and Gottipati, Manoj K. and Gilbert, Ryan J. (2020) Electrospun Fiber Scaffolds for Engineering Glial Cell Behavior to Promote Neural Regeneration. Bioengineering, 8 (1). p. 4. ISSN 2306-5354

R

Ramkumar, G. and Arthi, B. and Jebaseelan, S. D. Sundarsingh and Gopila, M. and Bhuvaneswari, P. and Radhika, R. and Kailo, Geremew Geidare and Barik, Debabrata (2022) Implementation of Solar Heat Energy and Adsorption Cooling Mechanism for Milk Pasteurization Application. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Rathi, Vivek and Khan, Ahmad Ali (2024) Development of Vibration Annihilation of Sandwiched Beam with MROF DTSMC: A Novel Approach. In: Theory and Applications of Engineering Research Vol. 9. B P International, pp. 62-90. ISBN 978-81-971580-7-0

Raza, Muhammad Akarm and Kanwal, Zakia and Shahid, Ambreen and Fatima, Shafaq and Sajjad, Amna and Riaz, Saira and Naseem, Shahzad and De Bonis, Angela (2021) Toxicity Evaluation of Arsenic Nanoparticles on Growth, Biochemical, Hematological, and Physiological Parameters of Labeo rohita Juveniles. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Ribes-Pleguezuelo, Pol and Delacourt, Bruno and Holmberg, Mika K. G. and Iorfida, Elisabetta and Reiss, Philipp and Salinas, Guillermo and Suliga, Agnieszka (2021) Exploring the Habitability of Venus: Conceptual Design of a Small Atmospheric Probe. Aerospace, 8 (7). p. 173. ISSN 2226-4310

S

Sagar, G. V. R. (2021) New Approach in Cryptography Using RC4 Protocol. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 120-126. ISBN 978-93-91882-81-5

San Antonio, James D. and Jacenko, Olena and Fertala, Andrzej and Orgel, Joseph P.R.O. (2020) Collagen Structure-Function Mapping Informs Applications for Regenerative Medicine. Bioengineering, 8 (1). p. 3. ISSN 2306-5354

Sanchez-Carmona, Alejandro and Cuerno-Rejado, Cristina (2021) Design Process and Environmental Impact of Unconventional Tail Airliners. Aerospace, 8 (7). p. 175. ISSN 2226-4310

Scarano, Antonio and Inchingolo, Francesco and Rapone, Biagio and Lucchina, Alberta Greco and Qorri, Erda and Lorusso, Felice (2021) Role of Autologous Platelet Gel (APG) in Bone Healing: A Rabbit Study. Applied Sciences, 11 (1). p. 395. ISSN 2076-3417

Seidel, Johannes and Lippert, Stephan and von Estorff, Otto (2021) Vibro-Acoustical Sensitivities of Stiffened Aircraft Structures Due to Attached Mass-Spring-Dampers with Uncertain Parameters. Aerospace, 8 (7). p. 174. ISSN 2226-4310

Shek, Nova and Lee, Eunseo and Lee, Grace and Ko, Hayden and Lee, Eugene (2024) Interdisciplinary Applications of AI: Dermatology and Psychology. Journal of Engineering Research and Reports, 26 (8). pp. 34-48. ISSN 2582-2926

Shi, Hengtao (2021) Effect of the Reynolds Number and Clearance Flow on the Aerodynamic Characteristics of a New Variable Inlet Guide Vane. Aerospace, 8 (7). p. 172. ISSN 2226-4310

Sivaperuman Kalairaj, Manivannan and Banerjee, Hritwick and Senthil Kumar, Kirthika and Lopez, Keith Gerard and Ren, Hongliang (2021) Thermo-Responsive Hydrogel-Based Soft Valves with Annular Actuation Calibration and Circumferential Gripping. Bioengineering, 8 (9). p. 127. ISSN 2306-5354

Slater, Luke T. and Karwath, Andreas and Hoehndorf, Robert and Gkoutos, Georgios V. (2021) Effects of Negation and Uncertainty Stratification on Text-Derived Patient Profile Similarity. Frontiers in Digital Health, 3. ISSN 2673-253X

Sokol, Galyna Ivanovna and Kotlov, Vladyslav Yurievich and Mironenko, Elena Sergeevna and Kirichenko, Sergey Yurievich (2021) Study on Infrasound Propagation of Finite Amplitude Wave in the Big Size Horn. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 110-119. ISBN 978-93-91882-81-5

Soleiman, Pegah and Moradi, Hadi and Mehralizadeh, Bijan and Ameri, Hamed and Arriaga, Rosa I. and Pouretemad, Hamid Reza and Baghbanzadeh, Negin and Vahid, Leila Kashani (2023) Fully robotic social environment for teaching and practicing affective interaction: Case of teaching emotion recognition skills to children with autism spectrum disorder, a pilot study. Frontiers in Robotics and AI, 10. ISSN 2296-9144

Sondhi, Ritika and Arora, Sudha (2023) Battery Management of Photovoltaic-Based Standalone DC Microgrid for Houses in Rural Areas. Journal of Engineering Research and Reports, 24 (3). pp. 10-19. ISSN 2582-2926

Soora, Narasimha Reddy (2021) Multiple License Plates Detection in Videos and Still Images Using Various Geometrical Properties and Filtering Techniques. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 1-25. ISBN 978-93-90768-21-9

Syarifudin, Achmad and Destania, Henggar Risa and Hamdani, Yunan (2021) Assessment and Prediction of Canal Erosion on Tidal Swamp Delta Telang I, Banyuasin Regency, South Sumatra. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 41-49. ISBN 978-93-90768-21-9

T

Tan, Liufan and Wu, Wanneng and Ding, Jinxin and Ye, Weihao and Li, Cheng and Liang, Qiaokang (2024) A Robust Pointer Meter Reading Recognition Method Based on TransUNet and Perspective Transformation Correction. Electronics, 13 (13). p. 2436. ISSN 2079-9292

Teow, Yeit Haan and Wan Mohammad Hamdan, Wan Nur Athirah and Mohammad, Abdul Wahab and Hua, Ming (2021) Preparation of Palm Oil Industry’s Biomass-Based Graphene Composite for the Adsorptive Removal of Methylene Blue. Adsorption Science & Technology, 2021. pp. 1-11. ISSN 0263-6174

Terrones-Saeta, Juan María and Suárez-Macías, Jorge and Iglesias-Godino, Francisco Javier and Corpas-Iglesias, Francisco Antonio (2021) Development of High Resistance Hot Mix Asphalt with Electric Arc Furnace Slag, Ladle Furnace Slag, and Cellulose Fibers from the Papermaking Industry. Applied Sciences, 11 (1). p. 399. ISSN 2076-3417

Thejaswini, S. and Babu, N. Ramesh and Ravikumar, K. M. (2021) EEG Bases Emotion Detection Using Deep Learning Algorithm. In: New Approaches in Engineering Research Vol. 16. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 79-89. ISBN 978-93-5547-070-6

Thongkam, Montree and Saelim, Jinnaput and Boonchom, Banjong and Seesanong, Somkiat and Chaiseeda, Kittichai and Laohavisuti, Nongnuch and Bunya-atichart, Kanokpon and Boonmee, Wimonmat and Taemchuay, Duangkamol and Nassar, Amr (2021) Simple and Rapid Synthesis of Calcium Acetate from Scallop Shells to Reduce Environmental Issues. Adsorption Science & Technology, 2021. pp. 1-9. ISSN 0263-6174

Torres-Arellano, Mauricio and Bolom-Martínez, Manuel de Jesus and Franco-Urquiza, Edgar Adrian and Pérez-Mora, Ruben and Jiménez-Arévalo, Omar A. and Olivier, Philippe (2021) Bearing Strength and Failure Mechanisms of Riveted Woven Carbon Composite Joints. Aerospace, 8 (4). p. 105. ISSN 2226-4310

U

Uesaka, M. and Pohl, M. and Miyoshi, K. and Inoue, Y. and Takahashi, T. and Ozeki, M. and Kamei, S. and Jang, J. and Yoshida, M. and Koyama, K. and Ikeda, T. (2021) Compact RF/ Laser Dielectric Linacs for Internal and External Cancer Therapy and Dynamic DNA Damage/Repair Analysis. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 204-217. ISBN 978-93-90768-48-6

V

Vedernikov, Dmitry V. and Shanygin, Alexander N. and Mirgorodsky, Yury S. and Levchenkov, Mikhail D. (2021) Strength Analysis of Alternative Airframe Layouts of Regional Aircraft on the Basis of Automated Parametrical Models. Aerospace, 8 (3). p. 80. ISSN 2226-4310

Venkatesh, R. and Sekaran, P. Raja and Udayakumar, K. and Jagadeesh, D. and Raju, K. and Bayu, Melkamu Beyene and Barik, Debabrata (2022) Adsorption and Photocatalytic Degradation Properties of Bimetallic Ag/MgO/Biochar Nanocomposites. Adsorption Science & Technology, 2022. pp. 1-14. ISSN 0263-6174

Vulpio, Alessandro and Suman, Alessio and Casari, Nicola and Pinelli, Michele (2021) Dust Ingestion in a Rotorcraft Engine Compressor: Experimental and Numerical Study of the Fouling Rate. Aerospace, 8 (3). p. 81. ISSN 2226-4310

W

Wang, Chen and Feng, Zengchao and Wang, Xing and Sanz P rez, Eloy S. (2021) Effect of Functional Groups in Coal on the Depth of Adsorption Potential Well. Adsorption Science & Technology, 2021. pp. 1-10. ISSN 0263-6174

Y

Yan, Sun and Sanz P rez, Eloy S. (2021) Effect of Coverage on Adsorptions of CO on Ni(110) Surface. Adsorption Science & Technology, 2021. pp. 1-7. ISSN 0263-6174

Yang, Yang and Fan, Guanheng and Ji, Xiangfei and Pei, Mengchen (2021) Modular Line-Focused Space Solar Power Satellite. Aerospace, 8 (3). p. 82. ISSN 2226-4310

Yue, Jianwei and Zhao, Limin and Zhang, Baoxi and Kong, Qingmei and Wang, Siyuan and Wang, Hao and Garcia-Granda, Santiago (2021) Effect of Glutinous Rice Slurry on the Reinforcement of Silt in the Yellow River Basin by Microbially Induced Carbonate Precipitation (MICP): Mechanical Property and Microcosmic Structure. Advances in Materials Science and Engineering, 2021. pp. 1-23. ISSN 1687-8434

Yue, Liu (2024) Research on the Application of TOPSIS Method in EPC Risk Assessment. Journal of Engineering Research and Reports, 26 (3). pp. 224-231. ISSN 2582-2926

Yue, Peng and Rong, Peijun (2019) Spatial Patterns and Driving Factors of Urban Residential Embedded Carbon Emissions: An Empirical Study in Kaifeng, China. Energy and Power Engineering, 11 (02). pp. 58-75. ISSN 1949-243X

Z

Zaman, Fahad A. and Townsend, Lawrence W. (2021) Radiation Risks in Cis-Lunar Space for a Solar Particle Event Similar to the February 1956 Event. Aerospace, 8 (4). p. 107. ISSN 2226-4310

Zhang, Jiachao and He, Yuewei and Fang, Yingchun and Zhao, Keqi and Wang, Nanyi and Zhou, Yaoyu and Luo, Lin and Yang, Yuan and Bin Abdullah, Muhammad Raziq Rahimi Kooh (2021) Characteristics and Influencing Factors of Microbial Community in Heavy Metal Contaminated Soil under Silicon Fertilizer and Biochar Remediation. Adsorption Science & Technology, 2021. pp. 1-10. ISSN 0263-6174

Zhang, Jihua and Zhang, Chi and Rehman, Rabia (2022) Reservoir Forming Conditions and Enrichment Law of Tight Sandstone Gas in Upper Paleozoic in Ordos Basin. Adsorption Science & Technology, 2022. pp. 1-8. ISSN 0263-6174

Zhao, Rongjian and Du, Lidong and Zhao, Zhan and Chen, Xianxiang and Sun, Jie and Man, Zhenzhen and Cao, Baogeng and Fang, Zhen (2021) Accurate Estimation of Heart and Respiration Rates Based on an Optical Fiber Sensor Using Adaptive Regulations and Statistical Classifications Spectrum Analysis. Frontiers in Digital Health, 3. ISSN 2673-253X

Zhao, Yan and Guo, Hui-xuan and Han, Hong-guang and Zhang, Jia-qi and Hu, Xiao-min and Bonilla-Petriciolet, Adrián (2021) Adsorptive Behavior of Prepared Metal-Organic Framework Composites on Phosphates in Aqueous Solutions. Adsorption Science & Technology, 2021. pp. 1-10. ISSN 0263-6174

Zhu, Tao and Wang, Ruonan and Zhang, Xing and Han, Yiwei and Bian, Wenjing and Ma, Yan and Xue, Ming and Rezaei, Fateme (2021) Enrichment and Separation of Methane Gas by Vacuum Pressure Swing Adsorption. Adsorption Science & Technology, 2021. pp. 1-12. ISSN 0263-6174

Zhu, Xinwei and Wang, Denghui and Hui, Shien and Kyzas, George (2021) Research Progress of Adsorption and Photocatalysis of Formaldehyde on TiO2/AC. Adsorption Science & Technology, 2021. pp. 1-16. ISSN 0263-6174

Zongo, A. S. and Daho, T. and Vaitilingom, G. and Piriou, B. and Valette, J. and Caillol, C. and Segda, B. G. and Higelin, P. and Koulidiati, J. (2018) The Effect of Atmospheric Oxygen on the Puffing and Bursting Phenomena during Vegetable Oils Droplets Vaporization Process for Their Use as Biofuel in Diesel Engine. Energy and Power Engineering, 10 (12). pp. 518-533. ISSN 1949-243X